Description
The filter is made of special polyurethane foam and refined activated carbon, which has a high adsorption function.The fume extractor filter helps to prevent dissipation into the room.
Features:
- Low noise and high-efficient 3500 RPM fan operates at acceptable db levels in solder workstations.
- The fume extractor soldering made of ESD safe material, lightweight and durable.
- The solder fan could efficient and rapid elimination of toxic gases.
The solder fume extractor can be used at various angles and exhaust smoke in all directions. 60（m3/h) high suction fan can captures and absorbs fumes from solder, flux, chemicals, gases，smoke and so on. The solder fan could efficient and rapid elimination of toxic gases.
 |
 |
 |
 |
Power SwitchOne-button start Open as you need, easy to operate. 1 1 |
Angle Adjustment ButtonThe fan is adjustable, which enables it to suck smoke from different angles. 1 1 |
Active Carbon FiltersEquipped with 5 Pcs of activated carbon filters. Normally the filter needs to be replaced every month. Note: Please do not wet the filter |
Pipe JointEquipped a pipe joint, you can connect to the pipe to exhaust the smoke outside. 1 1 1 |
 |
The filter is made of special polyurethane foam and refined activated carbon, which has a high adsorption function.The fume extractor helps to prevent dissipation into the room. |
Specifications:
| Model | 493 |
| Voltage | 110 V, 220 V |
| Max Air Flow | 1000 L/min |
| Injection Popr Concentration | 2 mg/L |
| Size Carbon Filter | 13 x 13 x 1 cm |
