Description
The Uniden UBCD3600XLT is a new digital Truck Tracker V Professional Scanner Receiver, that covers 25 – 1300 MHz wideband frequencies. The Truck Tracker V operation allows this scanner to scan APCO 25 Phase 1 and Phase 2, DMR, Motorola, EDACS, LTR Trucked Systems, NXDN as well as conventional analogue and P25 digital channels.
Features and Specifications:
|
Multi-Site Trunking – This lets you program the scanner to share trunked system IDs across multiple sites without duplicating IDs. Scan by Service Types – Scan your channels by Service Type i.e. Fire, Police, Railroad, etc. Multi-Level Display and Keypad light – Makes the display and keypad easy to see in dim light with three light levels. System/Channel Number Tagging – Number tags allow you to quickly navigate to a specific Favorites List, System, or Channel. PC Programming – Use the Sentinel software to manage your scanner’s Profiles, Favorites Lists, and firmware updates. Analog and Digital AGC – Helps automatically balance the volume level between different radio systems. Priority ID Scan – This allows you to set priority to talkgroup IDs. Individual Channel Volume Offset – This allows you to adjust the volume offset for each channel. 10 Custom Searches – This lets you program up to 10 custom search ranges. Quick Search – This lets you enter a frequency and start searching. |
|
Favourites Scan – This allows you to organize your Systems into Favorites Lists. The scanner will scan multiple Favorites Lists and a Full Database at the same time.
4 GB microSD card (provided – 1 GB up to 32 GB supported) – For storing Favorites Lists, Profiles, all your settings, Discovery sessions, and recording sessions.
Location-Based Scanning – Connect to a GPS receiver (not included) for precise system selection and continuing reselection when you travel. The scanner can automatically Avoid and Unavoid Systems and Departments based on your current location as provided by an external GPS unit.
Range Control – Lets you set how far out from your current location the scanner will search for channels in Favorites Lists. Location precision for departments and sites allows you to define a location and range using rectangles instead just of a single circle.
Trunk Tracker V Operation – Scans APCO 25 Phase 1 and Phase 2, DMR, Motorola, EDACS, EDACS ProVoice, and LTR trunked systems, as well as conventional analogue and P25 digital channels.
Custom Alerts – You can program your scanner to alert when you receive, a Channel or Unit ID, a Close Call hit, an ID transmitted with an Emergency Alert, or a Tone-out hit. For each alert in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7 colours, and 2 flash patterns.
Trunking Discovery – Monitors system traffic on a trunked radio system to find unknown IDs and automatically records audio from and logs new channels for later review and identification.
Conventional Discovery – Searches a range of frequencies to find unknown frequencies and automatically records audio from and logs new channels for later review and identification.
Search Speed – 80 steps/sec. (typical) in Search mode (max) except for 5 kHz steps. 250 step/sec. (typical) in Search mode (max) – (Turbo Search) for 5 kHz steps.
Start-up Configuration – You can program each of your Favorites Lists with a Startup Key (0-9) so that when you power up the scanner and press the key number, just those Favorites Lists assigned to the key will be enabled for the scan.
Close Call© RF Capture Technology – This Lets you set the scanner so it detects and provides information about nearby radio transmissions. Close Call Do-not-Disturb checks for Close Call activity in between channel reception so active channels are not interrupted.
Broadcast Screen – Allows the scanner to ignore hits in search and Close Call modes. You can also program up to 10 custom frequency ranges that the scanner will ignore.
Fire Tone-Out Standby/Tone Search – This Lets you set the scanner to alert you if a two-tone sequential page is transmitted. You can set up to 32 Tone-Outs. The scanner will also search and display unknown tones.
Priority/Priority w/DND Scan – priority channels let you keep track of activity on your most important channels while monitoring other channels for transmissions.
Intermediate Frequency Exchange – Changes the IF used for a selected channel/frequency to help avoid image and other mixer-product interference on a frequency.
Configurable Band Defaults – This allows you to set the step (5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz) and modulation (AM, FM, NFM, WFM, or FMB) for 31 different bands.
 |
 |
 |
